It takes the average reader 4 hours and 10 minutes to read Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion by James A. Cherry
Assuming a reading speed of 250 words per minute. Learn more
Among analog-to-digital converters, the delta-sigma modulator has cornered the market on high to very high resolution converters at moderate speeds, with typical applications such as digital audio and instrumentation. Interest has recently increased in delta-sigma circuits built with a continuous-time loop filter rather than the more common switched-capacitor approach. Continuous-time delta-sigma modulators offer less noisy virtual ground nodes at the input, inherent protection against signal aliasing, and the potential to use a physical rather than an electrical integrator in the first stage for novel applications like accelerometers and magnetic flux sensors. More significantly, they relax settling time restrictions so that modulator clock rates can be raised. This opens the possibility of wideband (1 MHz or more) converters, possibly for use in radio applications at an intermediate frequency so that one or more stages of mixing might be done in the digital domain. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits covers all aspects of continuous-time delta-sigma modulator design, with particular emphasis on design for high clock speeds. The authors explain the ideal design of such modulators in terms of the well-understood discrete-time modulator design problem and provide design examples in Matlab. They also cover commonly-encountered non-idealities in continuous-time modulators and how they degrade performance, plus a wealth of material on the main problems (feedback path delays, clock jitter, and quantizer metastability) in very high-speed designs and how to avoid them. They also give a concrete design procedure for a real high-speed circuit which illustrates the tradeoffs in the selection of key parameters. Detailed circuit diagrams, simulation results and test results for an integrated continuous-time 4 GHz band-pass modulator for A/D conversion of 1 GHz analog signals are also presented. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits concludes with some promising modulator architectures and a list of the challenges that remain in this exciting field.
Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion by James A. Cherry is 250 pages long, and a total of 62,500 words.
This makes it 84% the length of the average book. It also has 76% more words than the average book.
The average oral reading speed is 183 words per minute. This means it takes 5 hours and 41 minutes to read Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion aloud.
Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion is suitable for students ages 12 and up.
Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.
When deciding what to show young students always use your best judgement and consult a professional.
Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion by James A. Cherry is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.
To buy Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion by James A. Cherry on Amazon click the button below.
Buy Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion on Amazon