How Long to Read Inorganic and Metal-Containing Polymeric Materials

By Charles E. Carraher Jr.

How Long Does it Take to Read Inorganic and Metal-Containing Polymeric Materials?

It takes the average reader 7 hours and 42 minutes to read Inorganic and Metal-Containing Polymeric Materials by Charles E. Carraher Jr.

Assuming a reading speed of 250 words per minute. Learn more

Description

Research on metal-containing polymers began in the early 1960's when several workers found that vinyl ferrocene and other vinylic transition metal TI -complexes would undergo polymerization under the same conditions as conventional organic monomers to form high polymers which incorporated a potentially reactive metal as an integral part of the polymer structures. Some of these materials could act as semi conductors and possessed one or two dimensional conductivity. Thus applications in electronics could be visualized immediately. Other workers found that reactions used to make simple metal chelates could be used to prepare polymers if the ligands were designed properly. As interest in homogeneous catalysts developed in the late 60's and early 70's, several investigators began binding homogeneous catalysts onto polymers, where the advantage of homogeneous catalysis - known reaction mechanisms and the advantage of heterogeneous catalysis - simplicity and ease of recovery of catalysts could both be obtained. Indeed the polymer matrix itself often enhanced the selectivity of the catalyst. The first symposium on Organometallic Polymers, held at the National Meeting of the American Chemical Society in September 1977, attracted a large number of scientists interested in this field, both established investigators and newcomers. Subsequent symposia in 1977, 1979, 1983, and 1987 have seen the field mature. Hundreds of papers and patents have been published.

How long is Inorganic and Metal-Containing Polymeric Materials?

Inorganic and Metal-Containing Polymeric Materials by Charles E. Carraher Jr. is 448 pages long, and a total of 115,584 words.

This makes it 151% the length of the average book. It also has 141% more words than the average book.

How Long Does it Take to Read Inorganic and Metal-Containing Polymeric Materials Aloud?

The average oral reading speed is 183 words per minute. This means it takes 10 hours and 31 minutes to read Inorganic and Metal-Containing Polymeric Materials aloud.

What Reading Level is Inorganic and Metal-Containing Polymeric Materials?

Inorganic and Metal-Containing Polymeric Materials is suitable for students ages 12 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy Inorganic and Metal-Containing Polymeric Materials?

Inorganic and Metal-Containing Polymeric Materials by Charles E. Carraher Jr. is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy Inorganic and Metal-Containing Polymeric Materials by Charles E. Carraher Jr. on Amazon click the button below.

Buy Inorganic and Metal-Containing Polymeric Materials on Amazon