It takes the average reader 2 hours and 1 minute to read DFIG-based Wind Power Conversion System Connected to Grid by Akshay Kumar
Assuming a reading speed of 250 words per minute. Learn more
Master's Thesis from the year 2014 in the subject Engineering - Power Engineering, grade: 7.8, Ajay Kumar Garg Engineering College, course: M.Tech, language: English, abstract: Wind generation has become the most important alternate energy source and has experienced increased progress in India during the past decade. While it has great potential as an alternative to less environmentally friendly energy sources, there are various technical challenges that cause wind to be considered negatively by many utilities. Wind energy conversion systems suffer from the fact that their real power generation is closely dependent on the local environmental conditions. The Doubly Fed Induction Generator (DFIG) based wind turbine with variable-speed variable-pitch control scheme is the most popular wind power generator in the wind power industry. This machine can be operated either in grid connected or standalone mode. In this thesis, a detailed electromechanical model of a DFIG-based wind turbine connected to power grid as well as separately operated wind turbine system with different sub-systems is developed in the MATLAB/SIMULINK environment and its equivalent generator and turbine control structure is realized. In this regard following configurations have been considered: • DFIG with Battery storage sub-system • DFIG with Buck-Boost converter • DFIG with transformer • DFIG with 3-winding transformer Addition of battery storage and buck-boost converter sub-systems into the system enables not only dispatching of generator power but also decreases the variability in their reactive power requirements. The full control over both active and reactive power is possible by the use of transformer between DFIG and rotor side converter. The steady state behavior of the overall wind turbine system is presented and the steady state reactive power ability of the DFIG is analyzed. It has been shown that major part of the reactive power should be supplied from rotor side converter to reduce the overall rating of the generator. The DFIG with above mentioned sub-systems is connected to grid. The total harmonic distortion analysis and efficiency are carried out. It is found that DFIG with transformer in between machine and rotor side converter has lowest THD (2.29%) and DFIG with 3-winding transformer has maximum efficiency (above 93%).
DFIG-based Wind Power Conversion System Connected to Grid by Akshay Kumar is 118 pages long, and a total of 30,444 words.
This makes it 40% the length of the average book. It also has 37% more words than the average book.
The average oral reading speed is 183 words per minute. This means it takes 2 hours and 46 minutes to read DFIG-based Wind Power Conversion System Connected to Grid aloud.
DFIG-based Wind Power Conversion System Connected to Grid is suitable for students ages 10 and up.
Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.
When deciding what to show young students always use your best judgement and consult a professional.
DFIG-based Wind Power Conversion System Connected to Grid by Akshay Kumar is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.
To buy DFIG-based Wind Power Conversion System Connected to Grid by Akshay Kumar on Amazon click the button below.
Buy DFIG-based Wind Power Conversion System Connected to Grid on Amazon