How Long to Read Meniscus Stability in Rotating Systems

By Yvonne Chen

How Long Does it Take to Read Meniscus Stability in Rotating Systems?

It takes the average reader 4 hours and 52 minutes to read Meniscus Stability in Rotating Systems by Yvonne Chen

Assuming a reading speed of 250 words per minute. Learn more

Description

The knowledge of behavior of liquids with free surfaces to their surrounding gaseous phase in compensated gravity is essential to the development of tank systems for spacecrafts. In microgravity, the liquid behavior is dominated by capillary forces, which are used to position and redistribute liquid propellant in a desired way for the mission. The body forces occurring due to residual accelerations, which can be caused by spin during the ballistic flight phases, force the liquid to reorient towards a new equilibrium state of the free surface. Due to spin the liquid is driven away from the tank outlet and located along tank walls in partially filled tanks. To assure enough liquid fuel over the tank outlet, so-called Propellant Management Devices (PMD’s), are employed. A PMD is a static, usually metal structure, which either provides a passage way for a liquid in microgravity or stores a certain amount of liquid at a desired location. Some PMD’s are designed to be refillable in periods of microgravity due to openings in the outer housing or by a housing composed of perforated metallic sheets. These reservoirs are refilled in periods of compensated gravity in order to provide the required amount of liquid fuel for attitude control or other maneuverings. Relatively large disturbances, such as lateral accelerations and spin, can drive the liquid fuel out of the reservoir, resulting in malfunction of the device. During spilling, gas enters the device such that only a residual amount of liquid propellant can be kept in the reservoir. Moreover, the connection to the bulk liquid in the tank may be interrupted such that refilling of the reservoir is disrupted. Hence, a PMD with two parallel disks forming the inlet and a venting tube at the topmost point of the outer housing shall be designed such that its refillable structure is only filled with liquid without any gas or vapor being easily trapped during operations.

How long is Meniscus Stability in Rotating Systems?

Meniscus Stability in Rotating Systems by Yvonne Chen is 286 pages long, and a total of 73,216 words.

This makes it 97% the length of the average book. It also has 89% more words than the average book.

How Long Does it Take to Read Meniscus Stability in Rotating Systems Aloud?

The average oral reading speed is 183 words per minute. This means it takes 6 hours and 40 minutes to read Meniscus Stability in Rotating Systems aloud.

What Reading Level is Meniscus Stability in Rotating Systems?

Meniscus Stability in Rotating Systems is suitable for students ages 12 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy Meniscus Stability in Rotating Systems?

Meniscus Stability in Rotating Systems by Yvonne Chen is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy Meniscus Stability in Rotating Systems by Yvonne Chen on Amazon click the button below.

Buy Meniscus Stability in Rotating Systems on Amazon