How Long to Read Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations

How Long Does it Take to Read Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations?

It takes the average reader 1 hour and 2 minutes to read Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations by Ming Zhou

Assuming a reading speed of 250 words per minute. Learn more

Description

Ionic liquids display good CO2 absorption capacity but poor absorption kinetics and high costs. In the present work, we show that these problems can be solved by impregnating the new low-cost ionic liquid pentaethylenehexammonium chloride [PEHA][Cl] and the corresponding amine precursor on a low-cost mesoporous microsphere support. The results showed that sorbents displayed excellent sorption kinetics and capacity, comparable to the best reports in the literature. In addition, the sorbents could be regenerated and displayed high thermal stability. The costs of the sorbents developed in the present work is much lower than previously reported sorbents. Therefore, this novel supported IL system could be promising for industrial CO2 removal and recovery applications. Uniform 13X films with thicknesses of 11 μm were grown on supports in the form of steel monoliths with a cell density of 1600 cpsi and microchannels width of 0.5 mm. Sharp breakthrough fronts and a dynamic uptake of 3.4 mmol CO2 g-1 zeolite were observed. Numerical modeling showed that the adsorption process was very fast, the mass transfer resistance for the 11 μm film is 2.2 times lower than zeolite 13X pellets and 100 times lower than zeolite 4A beads. The steel monolith support provides good mechanical strength, low pressure drop and excellent thermal conductivity for the 13X films. The combination of properties makes this adsorbent a good performer when compared with other types of structured zeolite adsorbents in reported literatures. This microchannel adsorbent is a promising alternative to traditional adsorbents in processes of fast CO2 separation with short cycle times.

How long is Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations?

Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations by Ming Zhou is 62 pages long, and a total of 15,624 words.

This makes it 21% the length of the average book. It also has 19% more words than the average book.

How Long Does it Take to Read Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations Aloud?

The average oral reading speed is 183 words per minute. This means it takes 1 hour and 25 minutes to read Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations aloud.

What Reading Level is Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations?

Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations is suitable for students ages 8 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations?

Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations by Ming Zhou is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy Structured Ionic Liquid and Zeolite Adsorbents for Advanced CO2 Separations by Ming Zhou on Amazon click the button below.