How Long to Read Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray

How Long Does it Take to Read Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray?

It takes the average reader to read Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray by Zhen Yang

Assuming a reading speed of 250 words per minute. Learn more

Description

The principal objective of the present work is to experimentally investigate the timeresolved spray characteristics. Droplets data in a dilute region of a high-pressure diesel spray were obtained by employing the PDIA (particle/droplet image analysis) method with double pulse laser illumination. Eulerian specification was adopted to describe the transient spray microscopic behavior within a fixed test window at ten representative instants after triggering the injection. The experimental results indicate that the transient spray evolution can be characterized in three distinct stages. During stage I (the latency stage), the spray tip develops and reaches the test location, but no discrete droplets were clearly observed. During stage II, the spray passes through the test window, from which discrete droplets are observed to disperse in the dilute region and the SMD of the droplets increases rapidly. During stage III, bulk spray disappears in the test window and only discrete droplets were observed. The SMD of the droplets is decreased to a ''steady-state" value. Based on these sampled and processed data, the droplet size distribution functions were obtained and compared with the Rosin-Rammler and the Nukiyama-Tanasawa function. Finally, the Stokes number and the Weber number of each droplet were determined, and the movement of the droplets were analyzed. The measured time dependent droplet behaviors are believed to provide important data for spray modeling and simulation.

How long is Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray?

Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray by Zhen Yang is 0 pages long, and a total of 0 words.

This makes it 0% the length of the average book. It also has 0% more words than the average book.

How Long Does it Take to Read Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray Aloud?

The average oral reading speed is 183 words per minute. This means it takes to read Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray aloud.

What Reading Level is Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray?

Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray is suitable for students ages 2 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray?

Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray by Zhen Yang is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy Study on Transient Characteristics and Influencing Mechanism of Pulsed Spray by Zhen Yang on Amazon click the button below.