How Long to Read TCP/IP Networking for Beginners

How Long Does it Take to Read TCP/IP Networking for Beginners?

It takes the average reader 1 hour and 40 minutes to read TCP/IP Networking for Beginners by Paul Smart

Assuming a reading speed of 250 words per minute. Learn more

Description

In this book you will be guided from the basics of network terminology and the concepts of the layered model to closer examination of the layers, the hardware at each layer, the protocols, and how to troubleshoot each layer.Ideally suited to a beginner.The book contains the following sections.Networking Models: There are two theoretical models used to describe networking protocols and hardware, these are covered in detail.Ethernet: This is the most common form of local area network. The addressing scheme and hardware used to connect network devices to Ethernet networks is covered.Network Devices: This section will cover the differences between various types of network hardware that operates on Ethernet networks such as repeaters, hubs, bridges and switches.Troubleshoot at Layer 2: Up to this point, networking at layers one and two will have been discussed. This section introduces troubleshooting methods and techniques for diagnosing problems in these layers.Internet Protocol Addressing: The most prolific addressing scheme used at layer three is IP addressing. The way the address space is used has changed since it was invented in the late 60's. We will look at the way IP addressing is used to facilitate routing and the configuration of IP addressing in various operating systems.Routing: IP addressing allows packets of network information to be routed between different IP networks. This is done by routers. We will look at what routers do, routing protocols, different types of route and the configuration of routing on various operating systems.Troubleshooting at Layer 3: This sections looks at the analysis of IP packets and tools that can be used to diagnose layer three connectivity problems.Name Resolution: Computers may have various addresses but they are more commonly referred to by a name. The names are resolved to addresses that will be looked at in this section by several methods.Troubleshoot Networking: An overview of approaches to troubleshooting in different operating systems.

How long is TCP/IP Networking for Beginners?

TCP/IP Networking for Beginners by Paul Smart is 100 pages long, and a total of 25,000 words.

This makes it 34% the length of the average book. It also has 31% more words than the average book.

How Long Does it Take to Read TCP/IP Networking for Beginners Aloud?

The average oral reading speed is 183 words per minute. This means it takes 2 hours and 16 minutes to read TCP/IP Networking for Beginners aloud.

What Reading Level is TCP/IP Networking for Beginners?

TCP/IP Networking for Beginners is suitable for students ages 10 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy TCP/IP Networking for Beginners?

TCP/IP Networking for Beginners by Paul Smart is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy TCP/IP Networking for Beginners by Paul Smart on Amazon click the button below.