It takes the average reader 5 hours and 34 minutes to read The Response of Reinforced Concrete to In-plane Shear and Normal Stresses by Frank Vecchio
Assuming a reading speed of 250 words per minute. Learn more
"An analytical model is developed for predicting the response of reinforced concrete to in-plane shear and normal stresses. The model is based on conditions of equilibrium and compatibility, and utilizes realistic stress-strain relationships for the reinforcement and for the concrete. Stresses and strains are considered in terms of average values, 'smeared' over a finite area of reinforced concrete. A bi-linear average stress-strain relationship is assumed for the-reinforcement. To determine appropriate Average stress-strain relationships for concrete, thirty reinforced concrete panels were tested under well defined, uniform-stresses. While most of the panels were tested in pure shear, other load cases included combined shear and biaxial compression, and combined shear and biaxial tension. The test results reveal that the average principal compressive stress-strain behavior of cracked concrete differs substantially from that of a cylinder loaded in uniaxial compression. The presence of large average tensile strains can result in a significant deterioration in both the strength and stiffness of concrete. A simple expression is given which describes well the observed behavior. The panel tests also indicate that the average tensile stresses acting in the concrete can be significantly greater than zero, even after extensive cracking has occurred. Expressions are given relating the average principal tensile stress in the concrete to the average principal tensile strain and to the stress conditions in the reinforcement. The analytical model is used to predict the observed response of the test panels. Good agreement is obtained in terms of failure stresses, and in terms of deformations at all stages of loading. The model is also used to make a theoretical study of factors influencing the shear strength of reinforced concrete. As an example of its possible application in predicting the behavior of more complex structures, the model is used to predict the response of reinforced concrete beams in shear. The predictions are compared to experimental results reported by other investigators. Good agreement is obtained. It is believed that the model will form the basis for future non-linear finite element analysis of reinforced concrete structures."--Page ii-iii.
The Response of Reinforced Concrete to In-plane Shear and Normal Stresses by Frank Vecchio is 332 pages long, and a total of 83,664 words.
This makes it 112% the length of the average book. It also has 102% more words than the average book.
The average oral reading speed is 183 words per minute. This means it takes 7 hours and 37 minutes to read The Response of Reinforced Concrete to In-plane Shear and Normal Stresses aloud.
The Response of Reinforced Concrete to In-plane Shear and Normal Stresses is suitable for students ages 12 and up.
Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.
When deciding what to show young students always use your best judgement and consult a professional.
The Response of Reinforced Concrete to In-plane Shear and Normal Stresses by Frank Vecchio is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.
To buy The Response of Reinforced Concrete to In-plane Shear and Normal Stresses by Frank Vecchio on Amazon click the button below.
Buy The Response of Reinforced Concrete to In-plane Shear and Normal Stresses on Amazon