How Long to Read Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer

How Long Does it Take to Read Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer?

It takes the average reader 1 hour and 16 minutes to read Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer by Hang Chen

Assuming a reading speed of 250 words per minute. Learn more

Description

A mercury detection system was built and tested to help assess the mercury absorption ability of synthetic disks, made of Kapton polyimide film, under simulated flue gas conditions at different temperature levels. These synthetic disks would be part of a continuous mercury monitoring system developed by UHV, Inc. and the Lehigh University Energy Research Center. Evaluation of the disks was based on mercury absorption efficiency, calculated from the difference in mercury concentration before and after placing the discs into the detection system. CFD simulations of the temperature field in the test chamber were performed to get an accurate value of the gas temperature at the disk positions. Curve fits for the relationship between mercury absorption efficiency and gas temperature was drawn. This would provide valuable information to be used in the manufacture of the synthetic disk for the UHV mercury analyzer. It was found that the synthetic disks have a better temperature performance in terms of mercury absorption capacity in plain nitrogen flow (60.5% at 150°F) than where the simulated flue gas contains 700 ppm NO, 350 ppm SO 2, 12.5% CO2, 5% O2 and N2 balancing the mixture (36.37% at 150). Testing of the disks under simulated flue gas condition with 20% moisture was also performed at 150°F to simulate the conditions of flue gas after a Wet Flue Gas Desulfurization system. The results showed that flue gas humidity has very little impact on the mercury absorption efficiency of the synthetic disks at 150°F.

How long is Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer?

Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer by Hang Chen is 75 pages long, and a total of 19,125 words.

This makes it 25% the length of the average book. It also has 23% more words than the average book.

How Long Does it Take to Read Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer Aloud?

The average oral reading speed is 183 words per minute. This means it takes 1 hour and 44 minutes to read Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer aloud.

What Reading Level is Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer?

Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer is suitable for students ages 8 and up.

Note that there may be other factors that effect this rating besides length that are not factored in on this page. This may include things like complex language or sensitive topics not suitable for students of certain ages.

When deciding what to show young students always use your best judgement and consult a professional.

Where Can I Buy Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer?

Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer by Hang Chen is sold by several retailers and bookshops. However, Read Time works with Amazon to provide an easier way to purchase books.

To buy Experimentation with Synthetic Material Disks for Mercury Capture Using an On-Line Mercury Analyzer by Hang Chen on Amazon click the button below.